Tyre Killer-Automatic Road Spike Barrier Surface Mounted

Surface Mounted Automatic Tyre Killer 

This type of spike barrier is driven by an electric motor installed in front of the main gate. Mostly, it is in rising status. When there is authorized vehicle to access, security people can use the remote control or manual switch to put the spike down. It can be integrated with all access control system or parking system. 

The Spiker Barrier is commonly used with the parking boom barrier and traffic light. When the green light on,  the tire killer spike will close then the parking boom will rise up. When the red light is on, the parking boom will close and then the spike will rise up. This is to avoid the spike damage the vehicle tires. They can also be equipped with loop detector coil to close automatically,  beam sensor for safety. We have our standard size but we can also customize based on clients requirement. 

The standard tyre killer is a one-way spike barrier. It can also be used for 2 ways. There will be two mechanisms and two motors, two control boxes. It controls bidirectional.

Technical Parameter of Automatic Tire Killer 

1. Application range: Intersection safe protection in the main area
2. Material: A3 Steel
3. Surface treatment: Anti-rust Paint with reflective strip
4. IP rate: IP67
5. Specified color: Black and yellow 
6. Length: Max 7m
7. Width  ：520mm 
8. Height:   70～90mm
9. Max loading weight: 80T
10. Tyre Killer Spike Height: 150mm
11.  Spike Thickness: 10mm
12. Drive mode: Electromechanical
13. Working Environment:   -40℃～+70℃
14. Control mode: Short-range wireless remote control/drive-by-wire
15. Remote control distance: within 100M 
16. Traffic light interface
17. Gang control with parking barrier and parking system 
18. Material thickness：12mm(14,16mm options)
19. The whole plate forming bending 
20. System ：220V electric motor drive
21. Power supply：220（Control voltage 24V）
22. System dynamic power (w)：180W
23. Rising time：≤1-2S
24. Lowering time：≤1-2S
25. Working Temperature：-35℃~75℃
26. Storage Environment ：-10℃~65℃
27. Color： Optional
28. Weight：0.3T
29.  Casing Spec: Standard casing（Size can be customized）Mechenism control box size: 450*280*550mm

L3000*W520*H85, Rising Length：150

L3500*W520*H85, Rising Length：150

L4000*W520*H85, Rising Length：150

L4500*W520*H85, Rising Length：150

L5000*W520*H85, Rising Length：150

L5500*W520*H85, Rising Length：150

L6000*W520*H85, Rising Length：150

OEM and ODM service 

As we are the manufacturer, we can also provide the OEM and ODM service. If you have your design drawing, welcome to inquire about the details. Your satisfaction is our pursuit.